Online Store
Unique Features for HVAC/R:
Non-contact Voltage
Loud beeper and bright LED indicate the NCV tab is near AC voltages down to 24VAC.
Auto Ranging (HS35, HS36)
Automatically changes range for best resolution.
Microamps (HS35,HS35):
For flame rectifier diode tests.
Backlight (HS36)
To see display in the dark.
True RMS (HS36):
For non-sinusoidal wave forms.
Capcitance:
For motor-run and motor-start capacitors
And More:
- Rugged rubberised case with magnetic hanger.
- Hi-Voltage indicators you can’t miss. Both LED and beeper turn on to indicate you have touched potentially dangerous voltage.
- Continuity indicated by LED and beeper
- MAX/MIN automatically holds the highest or lowest measurement so you can view the display after you have disconnected.
- Low Ohms range for motor windings and mid range for thermistors.
- Frequency (HS35, HS36) for variable frequency drives.
- Auto power off to extend battery life.
Specifications: Features and Functions for the Real World
For hard to reach test points, remove the probe tips and connect to any Fieldpiece accessory head
For safe and easy testing, hang the meter using the magnetic hanger included. For maximum safety, clip one lead to ground using the alligator clip and test with one hand
- Probe storage in the back, just snap them in.
- Removable probe tips for connection to most accessory heads.
- Attach detachable probe tip directly into jack for easy and safe voltage testing.
- Silicone wire test leads remain flexible in cold weather, withstand caustic chemicals and work well in temperatures that will melt vinyl leads.
- Leads conveniently wrap around meter and store
Bright LEDs combined with the beeper make the meter safer and easier to use.
MIN/MAX button lets you record BOTH minimum and maximum readings. This is particularly handy while recording temperature. Can also be used with accessory heads
Every HS30 series meter comes packaged inside the padded ANC-1, 4 pocket case. A 400AAC clamp head is included. Just slide the clamp onto the top of the HS30 meter to read amps. Also included are deluxe silicone test leads, alligator clips, K-type thermocouple, velcro strap, 9V battery (Installed) and operators manual
+ VAT
+ VAT
+ VAT
+ VAT